21-point inspection that catches the small stuff before a January no-heat surprise. Currently $19 (normally $49) for first-time customers — clean burners, test ignition, check gas pressure, verify safeties.
We don't just glance at the unit. Here's the real checklist every Five Star furnace tune-up runs through.
Dust and debris on burners cause yellow flames and incomplete combustion (= carbon monoxide). We clean burners on every tune-up.
Borescope camera check for cracks. A cracked heat exchanger leaks CO into your home. Annual inspection is the only way to catch it early.
Hot-surface igniter ohm test, flame sensor cleaning, gas valve operation. The #1 most common no-heat call is ignition-related — we head it off.
Manifold pressure measured against manufacturer spec. Wrong pressure = inefficient burn, sooting, or short cycling.
Limit switches, rollout switches, pressure switches all tested. These are the safeties that prevent fires and CO leaks. We make sure they actually work.
Blower wheel cleaned if needed, motor amperage measured, filter replaced. Clean blower = efficient heat distribution.
Not sure what you need? A real human in St. George answers the phone day, night, weekends, holidays. Tell us what's happening and we'll point you the right direction.
Tap to call now →No mystery, no four-hour windows, no surprise charges at the end.
Pre-winter slots fill up fast. Book online or call — we'll get you on the schedule, usually within 1-2 weeks during October-November peak.
Tech runs the full checklist — burners, heat exchanger, ignition, gas pressure, safeties, electrical, controls. 60-90 minutes for most homes.
Written report of anything that needs attention. No upsell pressure. You decide what to fix and when.
St. George-based with techs working from Bloomington up to Parowan every day. We'll be at your door — usually faster than you'd expect.
These are the questions our techs actually get asked on the phone every day.
